REAL TIME INVENTORY. NO BACKORDERS. Ships within 1 - 3 Business Days!

Glock® 43/43X/48 Compatible Micro Conversion Kit w/ Long Stabilizer Brace

$299.99
SKU:
MCK43/48GEN2
Availability:
In Stock! Ships within 1 - 3 Business Days!
  • Fast Shipping

  • Thousands of Reviews

  • 7 Day Customer Service

  • Amazing Selection

So you're the type of Glock® pistol fan who's looking to make a Glock®-to-Halo type of change to your backup brick. Hey, lots of people do this. If you're like them, your Glock® isn't just a pistol. You desire to make it more. You need to turn it into a full-sized, full-lengthed, braced pistol that you can really take control of. Check this out. This is the Glock® Compatible Micro Conversion Kit with Long Stabilizer Brace for most of your single-stack Glock® models. Use it to take your shooting experience to the aforementioned next level and gain a much greater amount of control in addition to Olympic-level shooting. Plus, it turns your average "black brick" pistol into something much cooler. As for the more practical specifics, I'm not done yet...

As mentioned, this platform is compatible with Glock® models 43, 43X, and 48. The rear's got an integrated folding pistol brace both for control and to make the entire piece smaller for travel or for use as your truck gun, or whatever other reason for which you'd need to shrink it The top's got a picatinny rail, so you can mount rifle sights or a even a full-sized optic to truly squeeze every last bit of accuracy out of your Glock®. The underside of the pistol brace also has QD mount, so you can throw a sling on it as well. See below for more info.

Please note the Micro Conversion Kit is NOT compatible with the following:

  • Gen1 & Gen2 models of Glock
  • MOS models
  • P80 Frames

Features:

  • Lightweight and sturdy
  • Barrel shroud constructed from aluminum with a polymer body
  • Compatible with Glock® models 43, 43X, and 48
  • Folding pistol brace locks into position for added stability
  • QD sling mount located on underside of pistol brace
  • No pistol disassembly required – Just place pistol into the kit, lock, and go
  • Allows for multiple handgun models into one platform
  • Ergonomic Finger Groove Grip for more stability
  • Top Picatinny rail, allowing a combination of sights and/or optics
  • Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
  • Ambidextrous fast and easy handling
  • Front spare magazine holder for a faster reload
  • Built-in charging handle allowing for quicker assembly/disassembly
  • Exposed slide release for direct contact and easier use

Now compatible with the following:

  • UMAREX Glock 19x BB (Blowback Action)
  • UMAREX Glock 19 Gen3 BB & Airsoft
  • UMAREX Glock 17 Gen3 BB (Blowback Action)

Shipping Restrictions  

We cannot ship certain parts and accessories to states that prohibit the sale or ownership of such components, like California, New York, and others. Before ordering, see our shipping restrictions for a list of all prohibited states and locales. We try our best to keep our shipping restrictions current, but state laws change almost daily. It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm.  

80LowerJig.com only ships within the United States. Federal law prevents international shipments of our products.  

WARNING: Handling firearms parts and certain firearm accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov. 

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80LowerJig.com, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com. 

WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.

www.80lowerjig.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

Size:
Micro
Platform:
GLOCK®

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.