YOUR ORDER WILL SHIP IN 1 to 3 DAYS!
Real time inventory.  No backorders.

AR 15 Rifle Kit - .223 Wylde (16" Nitride Barrel & 12" MLOK Handguard) (1:7 Twist)

$669.99
SKU:
2231617(B)-MLOK(12QC)-BK

Description

In the mood for a little different look to an AR-15 than our standard line of AR build kits?  How about one whose handguard has some attitude? Building out this kit will get you an AR-15 with a 16" parkerized barrel chambered in .223 Wylde with a 12" slanted M-Lok handguard. A .223 Wylde barrel means you can reliably and accurately shoot both .223 and 5.56mm NATO rounds. All you'll need are a lower, a set of backup sights or optic of your choice.

What’s Included

This kit is not a firearm. It includes an assembled upper receiver, bolt carrier group, lower parts kit, and buffer assembly with buttstock. It does not include the component to make a firearm: A stripped lower receiver. Pair this rifle kit with an AR-15 80% lower receiver and AR-15 80% jig to fabricate a receiver, sold separately.

New builder? This guide explains 80% lower receivers.

223 Wylde AR Kit Specs

Barreled uppers are assembled in-house before shipment.

Barrel

  • Chamber: .223 Wylde
  • Contour: M4/Government
  • Length: 16”
  • Twist Rate: 1:7
  • Gas System: Carbine
  • Gas Port: 0.750”
  • Gas Hole Dia.: 0.070”
  • Muzzle Threads: 1/2x28
  • Feed Ramps: M4
  • Material: 4150 CMV
  • Finish: QPQ Nitride
  • Process: Button Rifled
  • Lining: QPQ Nitride
  • Extension: M4
  • Muzzle: A2 “Birdcage” Flash Hider

Handguard

  • Attachment System: 12" M-Lok
  • Finish: Type III Hardcoat Anodized (Mil-Spec)
  • Top Rail: M1913 Picatinny
  • Material: Billet 6061-T6 Aluminum
  • Attachment: Barrel Nut 

Stripped Upper Receiver

  • Profile: M4 Flattop
  • Material: Forged 7075-T6 Aluminum
  • Finish: Type III Hardcoat Anodized (Mil-Spec)

Bolt Carrier Group

  • Profile: M16/Full-Auto
  • Steel: Carpenter No. 158 (Mil-Spec)
  • Exterior: Phosphate Coating
  • Interior: Chrome-Lined
  • Gas Key: Staked, Chromed
  • Charging Handle: Included

Lower Receiver Parts

  • Buffer System: Mil-spec, Carbine
  • Buttstock: Mil-spec, M4-type
  • Parts Kit: Mil-spec, single-stage

Receiver sold separately

No FFL or serialization is required to fabricate a receiver under federal law. However, state laws vary. Some states require serialization or have banned 80% lowers and gun-making kits. We encourage each and every builder to perform their own research about the state and federal laws that apply to them.

Made in the USA  Lifetime Warranty

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or “assault weapons” (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily

80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.