The Difference Between a Good and Bad 80 Lower

Posted by 80-Lower on Jan 18th 2019

The Difference Between a Good and Bad 80 Lower

If you have landed on the decision to build your own AR then we congratulate you on embracing true 2A liberty. We’ve said it before, but once you know how to build your own firearm then no gun control advocate or shady politician will be able to remove this knowledge for you. That’s the beauty of the 80 percent lower and that’s what we have to offer here today.

Moreover, if you have decided to build your own AR then you are not looking to do so with a subpar part imported in from Cheap Partistan. Luckily, everything you will find here at meets top quality grade as we wouldn’t sell anything to our fellow Americans that we wouldn’t trust with our own lives. So let’s talk about the difference between a good or bad 80 lower.

Made in America

This part will perhaps take on a bit of patriotic flair, but the truth of the matter is American manufacturers have put more effort into making quality AR parts than any other part of the world. The AR has been called by many America’s gun as its military counterparts have been gifting freedom to the world since the 1960’s. Wildly popular in the United States of America, one would do well to look for an 80 percent lower made right here in the US of A. Luckly, we’ve got you covered.

You’ll find only American made products here that are either milspec 7075 forged aluminum or quality gold-standard billet aluminum. With the addition of a top notch quality American made 80 lower jig kit you can take that piece of aluminum and turn it into a legal to own firearm. The beauty of the 80 percent lower is that you can even purchase them and have them shipped right to your front door because according to the ATF it is nothing but a big hunk of metal until completed. It doesn’t take a lot of technical know how to complete and can be done so fairly quickly.

Look for a Quality Guarantee

The next element that we would encourage you to look for is a manufacturer willing to offer a 100% guarantee on its product. If you are not sure where to find a company willing to offer such a guarantee we’ll give you a hint. Psst, you are already on the website of one! That’s right and the truth of the matter is that for a company that knows what it is doing, it is not hard to produce a hunk of metal shaped appropriately to 80 percent lower form. So if a company is unwilling to offer such a guarantee then that is your first red flag there.

With our guarantee you can even by 80 percent lowers in bulk orders of 5 at a time and trust that each one is ready to go.  Not to mention, recent gun legislation in America should motivate you to purchase in bulk if you can. We can’t say what the future will hold, but for right now you can have these bad boys shipped right to your front door no problem. Might be a good idea if the gun grabbers ever get their way to have a few of these on the shelves.

With that being said, that’s about it. Look for a quality 80 lower made in America with a 100% guarantee and you can’t go wrong.

Don’t forget to check out the rest of our pew pew pew offerings here at

DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.